The light mobile gantry is a new type of small hoisting gantry developed by Confossen based on the daily production needs of medium and small factories (company) for handling equipment, warehouse in and out, hoisting and repairing heavy equipment and material transportation. It is suitable for manufacturing molds, auto repair factories, mines, construction sites and occasions where lifting is required. The biggest advantage of this light mobile gantry is that it can be moved in all directions, can be quickly disassembled and installed, and has a small footprint. It can be transferred to another site for installation and use with a miniature car.
The light small gantry crane is a device similar to the gantry frame. The frame part is also composed of columns and beams. The beam is composed of I-beams, using 16-gauge I-beams. It can be equipped with a 1 ton chain hoist, 1 ton Electric hoist, 1 ton miniature electric hoist, 1 ton hoist. The light-duty small gantry crane has a lifting capacity of 1 ton, and the shelf part is completely connected by bolts, which can be completely disassembled and assembled. Since the light mobile gantry is widely used and the frequency of use is high, problems will inevitably be encountered in use. The following is a detailed explanation of the overload and low load of the electric hoist when the light mobile gantry is equipped with an electric hoist.
Use limit switches to eliminate damage to light-duty mobile gantry electric hoists caused by overloading and underloading.
1. Button control handle: Lightweight button control is rainproof and responsive.
2. Anti-wear load sheave: The load sheave is made of alloy steel, and has been heat-treated to resist wear and fit smoothly with the chain. The new chain design guide provides guidelines for smooth insertion of the chain into the sheave.
3. Low voltage of operating handle: The operating handle voltage of standard light mobile gantry electric hoist is 24V-36V low voltage control, low voltage can effectively protect the operator from electric shock injury. (The control of the operating handle voltage at 24V-36V is also a mandatory requirement of the General Administration of Quality Supervision, Inspection and Quarantine for special lifting equipment.)
4. Lifting height to the limit: the possible lifting height that can be achieved by the compact structure design of the light-duty small gantry crane electric hoist.
5. Operation mode: The working mode of the light-duty mobile gantry electric hoist is divided into single-speed or double-speed hoisting, hanging hook or running trolley with manual or electric, two-way or multi-direction operation.
